BLE 12: Characteristic indication Master
This example shows how indicate processes works. The program first look for a certain BLE device and connects to it. Then, it subscribes to indications of a certain characteristic and wait for indications from the slave. Once 5 indications are received (or timeout is reached) the Master terminates the connection and starts again. This example is though to be used together with example BLE_11.
Required Materials
2 x Waspmote 2 x Battery 2 x Bluetooth Low Energy module 2 x Bluetooth module antenna 1 x Expansion board (if socket 1 is used) 1 x SD card
Notes
- Socket 0 is used by default - EEPROM is used in this example by default. - Never unplug module while Waspmote is turned ON. - Bluetooth module antenna should be connected. - The battery must be connected in ANY example. - This example can be executed in Waspmote v12 and Waspmote v15
Code
/*
* ------------------ [BLE_12] - Characteristic indication - Master -------
* Explanation: This example shows how indicate processes works.
* The program first look for a certain BLE device and connects to it.
* Then, it subscribes to indications of a certain characteristic and wait
* for indications from the slave. Once 5 indications are received
* (or timeout is reached) the Master terminates the connection and starts again.
* This example is though to be used together with example BLE_11.
*
* NOTE: the master can be replaced by a smartphone with a BLE app.
*
* Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L.
* http://www.libelium.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS ARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*
* Version: 1.0
* Design: David Gascón
* Implementation: Javier Siscart
*/
#include <WaspBLE.h>
// MAC address of BLE device to find and connect.
char MAC[14] = "000780789eeb";
// Aux variable
uint16_t flag = 0;
// Variable to count notify events
uint8_t eventCounter = 0;
void setup()
{
USB.println(F("BLE_12 Example"));
// 0. Turn BLE module ON
BLE.ON(SOCKET0);
}
void loop()
{
flag = 0;
// 1. Look for a specific device
USB.print("Scan for device: ");
USB.println(MAC);
if (BLE.scanDevice(MAC) == 1)
{
// 2. Now try to connect with the defined parameters.
USB.println(F("Device found. Connecting... "));
flag = BLE.connectDirect(MAC);
if (flag == 1)
{
USB.print("Connected. connection_handle: ");
USB.println(BLE.connection_handle, DEC);
// 3. get RSSI of the link
USB.print("RSSI:");
USB.println(BLE.getRSSI(BLE.connection_handle), DEC);
/* 4. Subscribe to indications of one characteristic.
In this case an attribute with handler 48.
NOTE 1: the client characteristic configuration attribute of
this characteristic has the handler 50.
NOTE 2: To subscribe indications it is necessary to write a '2'
*/
delay(1000);
USB.println(F("Subscribing to indications on characteristic 1.5"));
char indicate[2] = "2";
flag = BLE.attributeWrite(BLE.connection_handle, 50, indicate);
if (flag == 0)
{
/* 5. Indication subscription successful. Now start a loop till
receive 5 indication or timeout is reached (30 seconds). If disconnected,
then exit while loop.
NOTE 3: 5 indications are done by the example BLE_13.
*/
eventCounter = 0;
unsigned long previous = millis();
while (( eventCounter < 5 ) && ( (millis() - previous) < 30000))
{
// 5.1 Wait for indicate event.
USB.println(F("Waiting events..."));
flag = BLE.waitEvent(5000);
if (flag == BLE_EVENT_ATTCLIENT_ATTRIBUTE_VALUE)
{
USB.println(F("Indication received."));
/* attribute value event structure:
Field: | Message type | Payload| Msg Class | Method | Connection |...
Length: | 1 | 1 | 1 | 1 | 1 |...
Example: | 80 | 05 | 04 | 05 | 00 |...
...| att handle | att type | value |
...| 2 | 8 | n |
...| 30 00 | x | n |
*/
// 5.2 Extract the handler from the received event saved on the buffer BLE.event
uint16_t handler = ((uint16_t)BLE.event[6] << 8) | BLE.event[5];
USB.print("attribute with handler ");
USB.print(handler, DEC);
USB.println(" has changed. ");
USB.print("Attribute value: ");
// 5.3 Print attribute value
for(uint8_t i = 0; i < BLE.event[8]; i++)
{
USB.printHex(BLE.event[i+9]);
}
USB.println();
USB.println(F("Indicate acknowledge event automatically sent to the slave."));
USB.println();
eventCounter++;
flag = 0;
}
else
{
// 5.4 If disconnection event is received, then exit the while loop.
if (flag == BLE_EVENT_CONNECTION_DISCONNECTED)
{
break;
}
}
// Condition to avoid an overflow (DO NOT REMOVE)
if( millis() < previous ) previous=millis();
} // end while loop
delay(3000);
// 6. Disconnect. Remember that after a disconnection,
// the slave becomes invisible automatically.
if (BLE.getStatus(BLE.connection_handle) == 1)
{
flag = BLE.disconnect(BLE.connection_handle);
if (flag != 0)
{
if (flag == 534)
{
USB.println(F("Disconected."));
USB.println(F("Connection Terminated by Local Host"));
USB.println();
USB.println();
}
else
{
// Error trying to disconnect
USB.print("disconnect fail. flag = ");
USB.println(flag, DEC);
}
}
else
{
USB.println(F("Disconnected."));
USB.println();
USB.println();
}
}
else
{
// Already disconnected
USB.println(F("Disconnected.."));
USB.println();
}
}
else
{
// 4.1 Failed to subscribe.
USB.println(F("Failed subscribing."));
USB.println();
}
}
else
{
// 2.1 Failed to connect
USB.println(F("NOT Connected"));
USB.println();
}
}
else
{
// 1.1 Scan failed.
USB.println(F("Device not found: "));
USB.println();
}
}Output
H#
BLE_12 Example
Scan for device:000780789eeb
Device found. Connecting...
Connected. connection_handle: 0;
RSSI:-39
Subscribing to indications on characteristic 1.5
Waiting events...
Indication received.
attribute with handler 48 has changed
Attribute value: 01
Indicate acknowledge event automatically sent to the slave.
Waiting events...
Indication received.
attribute with handler 48 has changed
Attribute value: 02
Indicate acknowledge event automatically sent to the slave.
Waiting events...
Indication received.
attribute with handler 48 has changed
Attribute value: 03
Indicate acknowledge event automatically sent to the slave.
Waiting events...
Indication received.
attribute with handler 48 has changed
Attribute value: 04
Indicate acknowledge event automatically sent to the slave.
Waiting events...
Indication received.
attribute with handler 48 has changed
Attribute value: 05
Indicate acknowledge event automatically sent to the slave.
Disconected.
Connection Terminated by Local Host
Scan for device:000780789EEB
Device found. Connecting... Last updated