BT PRO 12: Pairing example

This example shows how to use pairing functions.

Required Materials

1 x Waspmote 1 x Battery 1 x Bluetooth module Pro 1 x Bluetooth module antenna 1 x Expansion board (if socket 1 is used) 1 x SD card

Notes

- Socket 1 will be used to connect Bluetooth module (using expansion board) - Socket 0 can also be used, plugging module directly. - It is recommended to set RTC time to your actual time. - SD card must be inserted to allow saving discovered devices. - Never unplug module while Waspmote is turned ON. - Bluetooth module antenna should be connected. - The battery must be connected in ANY example. - This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  --------------- [BT PRO_12] - Pairing example -------- 
 *  
 *  Explanation: This example shows how to use pairing functions.
 *      
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see . 
 *  
 *  Version:		1.1
 *  Design:			David Gascón
 *  Implementation:	Javier Siscart
 */

#include "WaspBT_Pro.h"

// Variable to store Mac address of remote Bluetooth module
char mac[18] = "2c:44:01:7f:f8:03";

void setup()
{

  USB.println(F("BT_PRO_12 example...")); 

  // Turn On Bluetooth module
  BT_Pro.ON(SOCKET1);
  
}

void loop()
{
  ////////////////////////////////////////////////
  // 1. Using pairing functions
  ////////////////////////////////////////////////  

  USB.print("Pairing with device:");
  USB.println(mac);

  // 1.1 pair with device, using default code "123456"
  if(BT_Pro.pair(mac) == 1)
  {    
    USB.print("Device ");
    USB.print(mac);
    USB.println(" paired succesfully.");
  }  
  else 
  {
    USB.println(F("Device not paired"));
  }

  // 1.2 check if device is paired
  if(BT_Pro.isPaired(mac) == 1)
  {    
    USB.print("Device ");
    USB.print(mac);
    USB.println(" already paired.");
  }  
  else 
  {
    USB.print("Device ");
    USB.print(mac);
    USB.println(" is not paired.");
  }

  // 1.3 Do necessary actions
  // Insert here your code, like connecting to a device, etc.


  // 1.4 Remove paired devices
  USB.println(F("Removing paired devices..."));
  BT_Pro.removePairedDevices();

  // 1.5 check if device is paired
  USB.println(F("After removing all pairs, check if it is paired:"));
  if(BT_Pro.isPaired(mac) == 1)
  {    
    USB.print("Device ");
    USB.print(mac);
    USB.println(" already paired.");
  }  
  else 
  {
    USB.print("Device ");
    USB.print(mac);
    USB.println(" is not paired.");
  }

  USB.println();

  // End loop delay
  delay(10000);  
}

Output

H#
BT_PRO_12 example...
Pairing with device:2c:44:01:7f:f8:03
Device 2c:44:01:7f:f8:03 paired succesfully.
Device 2c:44:01:7f:f8:03 already paired.
Removing paired devices...
After removing all pairs, check if it is paired:
Device 2c:44:01:7f:f8:03 is not paired.
Pairing with device:2c:44:01:7f:f8:03