4G 09: FTP upload
This example shows how to upload a file to a FTP server from Waspmote
Required Materials
1 x Waspmote 1 x Battery 1 x 4G module 1 x 4G antenna 1 x SIM card
Notes
- The battery has to be connected. - This example can be executed in Waspmote v15
Code
/*
--- 4G_09 - Uploading files to a FTP server ---
Explanation: This example shows how to upload a file to a FTP server
from Waspmote
Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L.
http://www.libelium.com
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
Version: 3.0
Design: David Gascón
Implementation: Alejandro Gállego
*/
#include <Wasp4G.h>
// APN settings
///////////////////////////////////////
char apn[] = "";
char login[] = "";
char password[] = "";
///////////////////////////////////////
// SERVER settings
///////////////////////////////////////
char ftp_server[] = "pruebas.libelium.com";
uint16_t ftp_port = 21;
char ftp_user[] = "t3g@libelium.com";
char ftp_pass[] = "ftp1234";
///////////////////////////////////////
///////////////////////////////////////////////////////////////////////
// Define filenames for SD card and FTP server:
// - If the file is in the root directory: "FILE.TXT" or "/FILE.TXT"
// - If the file is inside a folder: "/FOLDER/FILE.TXT"
///////////////////////////////////////////////////////////////////////
char SD_FILE[] = "FILE1.TXT";
char SERVER_FILE[] = "FILE2.TXT";
///////////////////////////////////////////////////////////////////////
// define variables
int error;
uint32_t previous;
uint8_t sd_answer;
void setup()
{
USB.ON();
USB.println(F("Start program"));
//////////////////////////////////////////////////
// 1. sets operator parameters
//////////////////////////////////////////////////
_4G.set_APN(apn, login, password);
//////////////////////////////////////////////////
// 2. Show APN settings via USB port
//////////////////////////////////////////////////
_4G.show_APN();
//////////////////////////////////////////////////
// 1. Create a new file to upload
//////////////////////////////////////////////////
///////////////////////////////////
// 1.1. Init SD card
///////////////////////////////////
sd_answer = SD.ON();
if (sd_answer == 1)
{
USB.println(F("1. SD init OK"));
}
else
{
USB.println(F("1. SD init ERROR"));
}
///////////////////////////////////
// 1.2. Delete file if exists
///////////////////////////////////
sd_answer = SD.del(SD_FILE);
if (sd_answer == 1)
{
USB.println(F("2. File deleted"));
}
else
{
USB.println(F("2. File NOT deleted"));
}
///////////////////////////////////
// 1.3. Create file
///////////////////////////////////
sd_answer = SD.create(SD_FILE);
if (sd_answer == 1)
{
USB.println(F("3. File created"));
}
else
{
USB.println(F("3. File NOT created"));
}
///////////////////////////////////
// 1.4. Append contents
///////////////////////////////////
USB.println(F("4. Appending data..."));
for (int i = 0; i < 90; i++)
{
sd_answer = SD.append( SD_FILE, "This is a new message\nThis is a new message\nThis is a new message\nThis is a new message\nThis is a new message\n");
if (sd_answer != 1)
{
USB.println(F("SD append error"));
}
else
{
USB.println(F("SD append ok"));
}
}
///////////////////////////////////
// 1.5. Close SD
///////////////////////////////////
SD.OFF();
USB.println(F("5. SD off"));
USB.println(F("Setup done\n\n"));
}
void loop()
{
//////////////////////////////////////////////////
// 1. Switch ON
//////////////////////////////////////////////////
error = _4G.ON();
if (error == 0)
{
USB.println(F("1. 4G module ready..."));
////////////////////////////////////////////////
// 2.1. FTP open session
////////////////////////////////////////////////
error = _4G.ftpOpenSession(ftp_server, ftp_port, ftp_user, ftp_pass);
// check answer
if (error == 0)
{
USB.println(F("2.1. FTP open session OK"));
previous = millis();
//////////////////////////////////////////////
// 2.2. FTP upload
//////////////////////////////////////////////
error = _4G.ftpUpload(SERVER_FILE, SD_FILE);
if (error == 0)
{
USB.print(F("2.2. Uploading SD file to FTP server done! "));
USB.print(F("Upload time: "));
USB.print((millis() - previous) / 1000, DEC);
USB.println(F(" s"));
}
else
{
USB.print(F("2.2. Error calling 'ftpUpload' function. Error: "));
USB.println(error, DEC);
}
//////////////////////////////////////////////
// 2.3. FTP close session
//////////////////////////////////////////////
error = _4G.ftpCloseSession();
if (error == 0)
{
USB.println(F("2.3. FTP close session OK"));
}
else
{
USB.print(F("2.3. Error calling 'ftpCloseSession' function. error: "));
USB.println(error, DEC);
USB.print(F("CMEE error: "));
USB.println(_4G._errorCode, DEC);
}
}
else
{
USB.print(F( "2.1. FTP connection error: "));
USB.println(error, DEC);
}
}
else
{
// Problem with the communication with the 4G module
USB.println(F("1. 4G module not started"));
}
////////////////////////////////////////////////
// 3. Powers off the 4G module
////////////////////////////////////////////////
USB.println(F("3. Switch OFF 4G module"));
_4G.OFF();
////////////////////////////////////////////////
// 4. Sleep
////////////////////////////////////////////////
USB.println(F("4. Enter deep sleep..."));
PWR.deepSleep("00:00:00:10", RTC_OFFSET, RTC_ALM1_MODE1, ALL_OFF);
USB.ON();
USB.println(F("5. Wake up!!\n\n"));
}Output
H#
Start program
*****************************
APN:
LOGIN:
PASSWORD:
*****************************
1. SD init OK
2. File deleted
Start program
*****************************
APN:
LOGIN:
PASSWORD:
*****************************
1. SD init OK
2. File NOT deleted
3. File created
4. Appending data...
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
SD append ok
5. SD off
Setup done
1. 4G module ready...
2.1. FTP open session OK
2.2. Uploading SD file to FTP server done! Upload time: 6 s
2.3. FTP close session OK
3. Switch OFF 4G module
4. Enter deep sleep...Last updated