802 12: Send AT commands

This program shows how to send AT commands to the XBee modules

Required Materials

1 x Waspmote PRO 1 x Battery 1 x MiniUSB wire 1 x XBee-802.15.4 module

Notes

- The battery has to be connected. - This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------ [802_12] - send packets to a gateway -------- 
 *  
 *  Explanation: This program shows how to send AT commands to the XBee
 *  modules
 *  
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see . 
 *  
 *  Version:           3.0 
 *  Design:            David Gascón 
 *  Implementation:    Yuri Carmona
 */
 
#include 


void setup()
{
  // init USB port
  USB.ON();
  USB.println(F("802_12 example"));

  // init XBee
  xbee802.ON();
  
 
  ////////////////////////////////////
  // 1. Request channel
  ////////////////////////////////////
  if(!xbee802.sendCommandAT("CH#")) 
  {
    USB.print(F("Channel: "));
    USB.printHex(xbee802.commandAT[0]);
    USB.println();
  }
  else 
  {
    USB.println(F("at error"));
  }
  

  ////////////////////////////////////  
  // 2. Request pan id
  ////////////////////////////////////
  if(!xbee802.sendCommandAT("ID#")) 
  {
    USB.print(F("PANID: "));
    USB.printHex(xbee802.commandAT[0]);
    USB.printHex(xbee802.commandAT[1]);
    USB.println();
  }
  else
  {
    USB.println(F("at error"));
  }
  
 
  ////////////////////////////////////
  // 3. Request encryption mode
  ////////////////////////////////////
  if(!xbee802.sendCommandAT("EE#")) 
  {
    USB.print(F("encryption mode: "));
    USB.printHex(xbee802.commandAT[0]);
    USB.println();
  }
  else
  {
    USB.println(F("at error"));
  }
}


void loop()
{
  // Do nothing
  delay(5000);
}

Output

H#
 802_12 example
 Channel: 0F
 PANID: 1234
 encryption mode: 00
 ...