Ag xtr 09: 5TM sensor reading

Basic example that turns on, reads and turn off the sensor. Measured parameters are stored in the corresponding class variables and printed by the serial monitor.

Required Materials

- 1 Waspmote Plug & Sense! Smart Agriculture Xtreme - 1 5TM sensor

Notes

- This example is only valid for Waspmote v15

Code

/*
    ----------- [Ag_xtr_09] - 5TM sensor reading --------------------

    Explanation: Basic example that turns on, reads and turn off the
    sensor. Measured parameters are stored in the corresponding class
    variables and printed by the serial monitor.

    Measured parameters:
      - Volumetric water content
      - Temperature of the soil

    Copyright (C) 2018 Libelium Comunicaciones Distribuidas S.L.
    http://www.libelium.com

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see .

    Version:           3.1
    Design:            David Gascón
    Implementation:    J.Siscart, V.Boria
*/

#include <WaspSensorXtr.h>

/*
  SELECT THE RIGHT SOCKET FOR EACH SENSOR.

  Possible sockets for this sensor are:
  - XTR_SOCKET_A       _________
  - XTR_SOCKET_B      |---------|
  - XTR_SOCKET_C      | A  B  C |
  - XTR_SOCKET_D      |_D__E__F_|


  Example: a 5TM sensor on socket A will be
  [Sensor Class] [Sensor Name] [Selected socket]
  Decagon_5TM    mySensor      (XTR_SOCKET_A);

  Refer to the technical guide for information about possible combinations.
  www.libelium.com/downloads/documentation/smart_agriculture_xtreme_sensor_board.pdf
*/

//   [Sensor Class] [Sensor Name] [Selected socket]
Decagon_5TM mySensor(XTR_SOCKET_A);

void setup()
{
  USB.println(F("5TM example"));
}

void loop()
{
  // 1. Turn ON the sensor
  mySensor.ON();

  // 2. Read the sensor
  /*
    Note: read() function does not directly return sensor values.
    They are stored in the class vector variables defined for that purpose.
    Values are available as a float value
  */
  mySensor.read();

  // 3. Turn off the sensor
  mySensor.OFF();

  // 4. Conversion of dielectric permittivity into Volumetric Water Content (VWC)
  // for mineral soil using Topp equation
  float VWC = ((4.3 * pow(10, -6) * pow(mySensor.sensor5TM.dielectricPermittivity, 3))
            - (5.5 * pow(10, -4) * pow(mySensor.sensor5TM.dielectricPermittivity, 2))
            + (2.92 * pow(10, -2) * mySensor.sensor5TM.dielectricPermittivity)
            - (5.3 * pow(10, -2))) * 100 ;


  // 5. Print information
  USB.println(F("---------------------------"));
  USB.println(F("5TM"));
  USB.print(F("Dielectric Permittivity: "));
  USB.printFloat(mySensor.sensor5TM.dielectricPermittivity, 2);
  USB.println();
  USB.print(F("Volumetric Water Content: "));
  USB.printFloat(VWC, 2);
  USB.println(F(" %VWC"));  
  USB.print(F("Soil temperature: "));
  USB.printFloat(mySensor.sensor5TM.temperature, 1);
  USB.println(F(" degrees Celsius"));
  USB.println(F("---------------------------\n"));

  delay(5000);

}

Output

H#
5TM example
---------------------------
5TM
Dielectric Permittivity: 14.60
Volumetric Water Content: 26.94 %VWC
Soil temperature: 26.2 degrees Celsius
---------------------------
---------------------------
5TM
Dielectric Permittivity: 14.60
Volumetric Water Content: 26.94 %VWC
Soil temperature: 26.2 degrees Celsius
---------------------------