This example shows how to read Bluetooth module MAC address. It is a read only value.
Required Materials
1 x Battery
1 x Coin battery
1 x Bluetooth module Pro
1 x Bluetooth module antenna
1 x Expansion board (if socket 1 is used)
1 x SD card
Notes
- Socket 1 will be used to connect Bluetooth module (using expansion board)
- Socket 0 can also be used, plugging module directly.
- It is recommended to set RTC time to your actual time.
- SD card must be inserted to allow saving discovered devices.
- Never unplug module while Waspmote is turned ON.
- Bluetooth module antenna should be connected.
- The battery must be connected in ANY example.
- This example can be executed in Waspmote v12 and Waspmote v15
Code
/* * --------------- [BT PRO_05] - Reading own Mac-------- * * Explanation: Reading Bluetooth module Mac address. * It is a read only value. * * Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. * http://www.libelium.com * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * * Version: 1.1 * Design: David Gascón * Implementation: Javier Siscart */#include"WaspBT_Pro.h"voidsetup(){USB.println(F("BT_PRO_05 Example"));// Turn On Bluetooth moduleBT_Pro.ON(SOCKET1);}voidloop(){// 1. Read Bluetooth module Mac address USB.print(F("Mac:"));USB.println(BT_Pro.getOwnMac());delay(2000);}
Output
H#
BT_PRO_05 Example
Startig SD...
Mac:00:07:80:4b:2c:8d