BT Pro 06: Reading Bluetooth temperature

This example shows how to read Bluetooth module temperature sensor. This value is not very reliable.

Required Materials

1 x Waspmote 1 x Battery 1 x Coin battery 1 x Bluetooth module Pro 1 x Bluetooth module antenna 1 x Expansion board (if socket 1 is used) 1 x SD card

Notes

- Socket 1 will be used to connect Bluetooth module (using expansion board) - Socket 0 can also be used, plugging module directly. - It is recommended to set RTC time to your actual time. - SD card must be inserted to allow saving discovered devices. - Never unplug module while Waspmote is turned ON. - Bluetooth module antenna should be connected. - The battery must be connected in ANY example. - This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------ BT PRO_06 - Reading bluetooth temperature -------- 
 *  
 *  Explanation: Reads internal temperature sensor of bluetooth module. 
 *  The refresh rate of the temperature sensor is not very high. 
 *  The manufactures do not consider this value very reliable.
 *  
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see . 
 *  
 *  Version:		1.1
 *  Design:			David Gascón
 *  Implementation:	Javier Siscart
 */
 
#include "WaspBT_Pro.h"

void setup()
{

  USB.println(F("BT_PRO_06 Example"));

  // Turn On Bluetooth module
  BT_Pro.ON(SOCKET1);
  
}

void loop()
{
  
  // 1. Read internal temperature sensor of bluetooth module.
  USB.print(F("temp:"));
  long b = BT_Pro.getTemp();
  USB.println(b);
   
}

Output

H#
BT_PRO_06 Example
Starting SD...
temp:32