LoRaWAN Global 07: Join OTAA send unconfirmed
This example shows how to configure the module and send packets to a LoRaWAN gateway without ACK after join a network using OTAA.
Required Materials
1 x Waspmote 1 x Battery 1 x LoRaWAN Global 1 x 868 MHz Antenna (for EU and IN bands) or 900 MHz Antenna (for AS, US, AU and KR bands)
Notes
- The battery has to be connected. - This example can be executed in Waspmote v15
/*
* ------ LoRaWAN Code Example --------
*
* Explanation: This example shows how to configure the module and
* send packets to a LoRaWAN gateway without ACK after join a network
* using OTAA
*
* Copyright (C) 2022 Libelium Comunicaciones Distribuidas S.L.
* http://www.libelium.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Version: 3.0
* Implementation: Luis Miguel Marti
*/
#include <WaspLoRaWAN_Global.h>
// socket to use
//////////////////////////////////////////////
uint8_t socket = SOCKET0;
//////////////////////////////////////////////
// Device parameters for Back-End registration
////////////////////////////////////////////////////////////
char APP_EUI[] = "0102030405060708";
char APP_KEY[] = "000102030405060708090A0B0C0D0E0F";
////////////////////////////////////////////////////////////
// Define port to use in Back-End: from 1 to 223
uint8_t PORT = 3;
// Define data payload to send (maximum is up to data rate)
char data[] = "0102030405060708090A0B0C0D0E0F";
// variable
uint8_t error;
uint8_t error_config = 0;
void setup()
{
USB.ON();
USB.println(F("LoRaWAN example - Send Unconfirmed packets (ACK)\n"));
USB.println(F("------------------------------------"));
USB.println(F("Module configuration"));
USB.println(F("------------------------------------\n"));
//////////////////////////////////////////////
// 1. Switch on
//////////////////////////////////////////////
error = LoRaWAN.ON(socket);
// Check status
if( error == 0 )
{
USB.println(F("1. Switch ON OK"));
}
else
{
USB.print(F("1. Switch ON error = "));
USB.println(error, DEC);
error_config = 1;
}
LoRaWAN.factoryReset();
//////////////////////////////////////////////
// 2. Enable adaptive data rate
//////////////////////////////////////////////
error = LoRaWAN.setADR(ADR_ON);
// Check status
if( error == 0 )
{
USB.println(F("2. Data rate set OK"));
}
else
{
USB.print(F("2. Data rate set error= "));
USB.println(error, DEC);
error_config = 2;
}
//////////////////////////////////////////////
// 3. Set Application EUI
//////////////////////////////////////////////
error = LoRaWAN.setAppEUI(APP_EUI);
// Check status
if( error == 0 )
{
USB.println(F("3. Application EUI set OK"));
}
else
{
USB.print(F("3. Application EUI set error = "));
USB.println(error, DEC);
error_config = 4;
}
//////////////////////////////////////////////
// 4. Set Application Session Key
//////////////////////////////////////////////
error = LoRaWAN.setAppKey(APP_KEY);
// Check status
if( error == 0 )
{
USB.println(F("4. Application Key set OK"));
}
else
{
USB.print(F("4. Application Key set error = "));
USB.println(error, DEC);
error_config = 5;
}
/////////////////////////////////////////////////
// 5. Join OTAA to negotiate keys with the server
/////////////////////////////////////////////////
error = LoRaWAN.joinOTAA();
// Check status
if( error == 0 )
{
USB.println(F("5. Join network OK"));
}
else
{
USB.print(F("5. Join network error = "));
USB.println(error, DEC);
error_config = 6;
}
//////////////////////////////////////////////
// 6. Switch off
//////////////////////////////////////////////
error = LoRaWAN.OFF();
// Check status
if( error == 0 )
{
USB.println(F("6. Switch OFF OK"));
}
else
{
USB.print(F("6. Switch OFF error = "));
USB.println(error, DEC);
error_config = 8;
}
if (error_config == 0){
USB.println(F("\n---------------------------------------------------------------"));
USB.println(F("Module configured"));
USB.println(F("After joining through OTAA, the module and the network exchanged "));
USB.println(F("the Network Session Key and the Application Session Key which "));
USB.println(F("are needed to perform communications. After that, 'ABP mode' is used"));
USB.println(F("to join the network and send messages after powering on the module"));
USB.println(F("---------------------------------------------------------------\n"));
USB.println();
}
else{
USB.println(F("\n---------------------------------------------------------------"));
USB.println(F("Module not configured"));
USB.println(F("Check OTTA parameters and restart the code."));
USB.println(F("If you continue executing the code, frames might not be sent even"));
USB.println(F("though the code prints: Send unconfirmed packet OK"));
USB.println(F("\n---------------------------------------------------------------"));
}
}
void loop()
{
//////////////////////////////////////////////
// 1. Switch on
//////////////////////////////////////////////
error = LoRaWAN.ON(socket);
// Check status
if( error == 0 )
{
USB.println(F("1. Switch ON OK"));
}
else
{
USB.print(F("1. Switch ON error = "));
USB.println(error, DEC);
}
//////////////////////////////////////////////
// 2. Join network
//////////////////////////////////////////////
error = LoRaWAN.joinABP();
// Check status
if( error == 0 )
{
USB.println(F("2. Join network OK"));
//////////////////////////////////////////////
// 3. Send unconfirmed packet
//////////////////////////////////////////////
error = LoRaWAN.sendUnconfirmed(PORT, data);
// Error messages:
/*
* '6' : Module hasn't joined a network
* '5' : Sending error
* '4' : Error with data length
* '2' : Module didn't response
* '1' : Module communication error
*/
// Check status
if( error == 0 )
{
USB.println(F("3. Send unconfirmed packet OK"));
if (LoRaWAN._dataReceived == true)
{
USB.print(F(" There's data on port number "));
USB.print(LoRaWAN._port,DEC);
USB.print(F(".\r\n Data: "));
USB.println(LoRaWAN._data);
}
}
else
{
USB.print(F("3. Send unconfirmed packet error = "));
USB.println(error, DEC);
}
}
else
{
USB.print(F("2. Join network error = "));
USB.println(error, DEC);
}
//////////////////////////////////////////////
// 4. Switch off
//////////////////////////////////////////////
error = LoRaWAN.OFF();
// Check status
if( error == 0 )
{
USB.println(F("4. Switch OFF OK"));
}
else
{
USB.print(F("4. Switch OFF error = "));
USB.println(error, DEC);
USB.println();
}
delay(10000);
}
Last updated