Power 05: I/O power supply

This example shows how to set up the power supply lines in the Waspmote I/O sockets

Required Materials

1 x Waspmote 1 x MiniUSB wire 1 x Battery

Notes

This example can be executed in Waspmote v12 and Waspmote v15

Code

/*
 *  ------ [PWR_5] - I/O Power Supply management -------- 
 *
 *  Explanation: This example shows how to set up the power supply lines
 *  in the Waspmote I/O sockets
 *
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see . 
 *  
 *  Version:           3.0
 *  Design:            David Gascon 
 *  Implementation:    Yuri Carmona
 */
 
 
void setup()
{
  USB.ON();
  USB.println(F("PWR_5 example"));
}

void loop()
{ 
  ///////////////////////////////////////////////////////
  // 1. switch on
  ///////////////////////////////////////////////////////
  USB.println(F("Switch on power supply lines"));  
  
  PWR.setSensorPower(SENS_3V3, SENS_ON);
  PWR.setSensorPower(SENS_5V, SENS_ON);
  
  // delay 10 secs
  delay(10000);
  
  
  ///////////////////////////////////////////////////////  
  // 2. switch off
  ///////////////////////////////////////////////////////
  USB.println(F("Switch off power supply lines"));  
  
  PWR.setSensorPower(SENS_3V3, SENS_OFF);
  PWR.setSensorPower(SENS_5V, SENS_OFF);
  // delay 10 secs
  delay(10000);
}

Output

H#
 PWR_5 example
 Switch on power supply lines
 Switch off power supply lines
 Switch on power supply lines
 Switch off power supply lines