Certifications
CE (European Union)
In accordance with the RED Directive, Libelium Comunicaciones Distribuidas S.L. declares that the "Smart Parking v2 EU" device is in conformity with the European Union legislation and with the following harmonized standards and technical specifications:
- EN 50581:2012
- EN 301 489-1 Ver. 2.1.1 (2017-02)
- EN 301 489-3 Ver. 2.1.1 (2017-03)
- EN 305 550-2 V1.2.1 (2014-10)
- Draft EN 305 550 V2.1.0 (2017-10)
- EN 300 220-1 V3.1.1 (2016-11)
- EN 300 220-2 V3.1.1 (2016-11)
- EN 62479:2011
- UNE-EN 62368-1:2014 + AC:2015 + AC1:2015 + AC2:2015 + AC:2017-03 + A11:2017
FCC (United States)
"Smart Parking v2 US" complies with Title 47 Part 15 subpart B of the FCC rules and regulations for Radio Frequency Devices -- Unintentional Radiators (2019). This device contains the following transmitter modules:
- FCC ID: T9JRN2903
- FCC ID: 2AQ6KA1
IP68 (EN 60529)
"Smart Parking v2" was tested according to the standards UNE-EN 60529:2018 + /A1:2018 + /A2:2018 (EN 60529:1991 + Erratum:1993 + /A1:2000 + /A2:2013).
Protection against solid foreign objects
The node was introduced inside an IP6X dust chamber for 8 hours, with talcum powder 2 kg/m and an internal 20 mbar pressure depression. After tests, no traces of dust were found inside the enclosure, proving an IP6X degree of protection. IP6X is the maximum rating for protection against solid foreign objects.
Protection against ingress of water
The node was introduced inside an immersion tank for 30 minutes. This test was performed with the lowest point of the enclosure at 1.2 m below water surface. After tests, no water traces observed inside the enclosure, proving an IPX8 degree of protection. IPX8 is the maximum rating for protection against ingress of water.
IK10 (EN 50102)
"Smart Parking v2" was tested according to the standards UNE-EN 50102:1996 + A1:1999 + Corr:2002 + A1 CORR:2002 (EN 62262:2002).
The node was submitted to 20 J impacts in several points of the enclosure (the equivalent to the impact of a 5 kg mass dropped from 400 mm above the impacted surface). After tests, no cracks nor holes were observed on the tested samples, proving an IK10 degree of protection. IK10 is the maximum rating for protection against external mechanical impacts.
​
If you want to know more about certifications, please contact the Libelium Sales Department.
Last modified 1yr ago
Copy link