Sw xtr 10: PHEHT sensor reading
Basic example that turns on, reads and turn off the sensor. Measured parameters are stored in the corresponding class variables and printed by the serial monitor.
- 1 Waspmote Plug & Sense! Smart Water Xtreme
- 1 PHEHT sensor
- This example is only valid for Waspmote v15
/*
----------- [Sw_xtr_10] - PHEHT sensor reading --------------------
Explanation: Basic example that turns on, reads and turn off the
sensor. Measured parameters are stored in the corresponding class
variables and printed by the serial monitor.
Measured parameters:
- Temperature
- pH
- Redox
- pH in mV
Copyright (C) 2018 Libelium Comunicaciones Distribuidas S.L.
http://www.libelium.com
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
Version: 3.0
Design: David Gascón
Implementation: J.Siscart, V.Boria
*/
#include WaspSensorXtr.h
/*
SELECT THE RIGHT SOCKET FOR EACH SENSOR.
Possible sockets for this sensor are:
- XTR_SOCKET_A
- XTR_SOCKET_B
- XTR_SOCKET_C
- XTR_SOCKET_D
- XTR_SOCKET_E (Only valid socket for init() or calibrating)
_________
|---------|
| A B C |
|_D__E__F_|
Refer to the technical guide for information about possible combinations.
www.libelium.com/downloads/documentation/smart_agriculture_xtreme_sensor_board.pdf
*/
Aqualabo_PHEHT mySensor(XTR_SOCKET_E);
void setup()
{
USB.println(F("PHEHT example"));
}
void loop()
{
// 1. Turn ON the sensor
mySensor.ON();
// 2. Read the sensor
/*
Note: read() function does not directly return sensor values.
They are stored in the class vector variables defined for that purpose.
Values are available as a float value
*/
mySensor.read();
// 3. Turn off the sensor
mySensor.OFF();
// 4. Print information
USB.println(F("---------------------------"));
USB.println(F("PHEHT"));
USB.print(F("Temperature: "));
USB.printFloat(mySensor.sensorPHEHT.temperature, 2);
USB.println(F(" degrees Celsius"));
USB.print(F("pH: "));
USB.printFloat(mySensor.sensorPHEHT.pH, 2);
USB.println();
USB.print(F("pH: "));
USB.printFloat(mySensor.sensorPHEHT.pHMV, 2);
USB.println(F(" mV"));
USB.print(F("Redox: "));
USB.printFloat(mySensor.sensorPHEHT.redox, 2);
USB.println(F(" mV"));
USB.println(F("---------------------------"));
delay(5000);
}
J#
PHEHT example
---------------------------
PHEHT
Temperature: 25.77 degrees Celsius
pH: 7.59
pH: -36.06 mV
Redox: 88.40 mV
---------------------------
---------------------------
PHEHT
Temperature: 25.77 degrees Celsius
pH: 7.61
pH: -36.97 mV
Redox: 88.63 mV
--------------------------
Last modified 2yr ago