Sw xtr 45: SAC sensor reading

Basic example that turns on, reads and turn off the sensor. Measured parameters are stored in the corresponding class variables and printed by the serial monitor.

Required Materials

- 1 Waspmote Plug & Sense! Smart Water Xtreme - 1 SAC sensor (StacSense)

Notes

- This example is only valid for Waspmote v15

Code

/*
    ----------- [Sw_xtr_45] - SAC sensor reading --------------------

    Explanation: Basic example that turns on, reads and turn off the
    sensor. Measured parameters are stored in the corresponding class
    variables and printed by the serial monitor.

    Measured parameters:
      - Temperature
      - SAC in m-1
      - COD equivalent in mg/L
      - BOD equivalent in mg/L
      - COT equivalent in mg/L carbon
      - UV compensated absorbance
      - GR compensated absorbance
      - Turbidity equivalent in mg/L
      - UV compensated transmittance
      - GR compensated transmittance

    Copyright (C) 2020 Libelium Comunicaciones Distribuidas S.L.
    http://www.libelium.com

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

    Version:           3.0
    Design:            David Gascón
    Implementation:    L. M. Martí
*/

#include <WaspSensorXtr.h>

/*
  SELECT THE RIGHT SOCKET FOR EACH SENSOR.

  Possible sockets for this sensor are:
    - XTR_SOCKET_A
    - XTR_SOCKET_B
    - XTR_SOCKET_C
    - XTR_SOCKET_D
    - XTR_SOCKET_E (Only valid socket for init() or calibrating)
                           _________
                          |---------|
                          | A  B  C |
                          |_D__E__F_|


  Refer to the technical guide for information about possible combinations.
  www.libelium.com/downloads/documentation/smart_agriculture_xtreme_sensor_board.pdf
*/
Aqualabo_SAC mySensor(XTR_SOCKET_D);

void setup()
{
  USB.println(F("SAC example"));

}

void loop()
{  
  // 1. Turn ON the sensor
  mySensor.ON();

  // 2. Read the sensor
  /*
    Note: read() function does not directly return sensor values.
    They are stored in the class vector variables defined for that purpose.
    Values are available as a float value
  */
  mySensor.read();

  // 3. Turn off the sensor
  mySensor.OFF();

  // 4. Print information
  USB.println(F("---------------------------"));
  USB.println(F("SAC"));
  USB.print(F("Temperature: "));
  USB.printFloat(mySensor.sensorSAC.temperature, 4);
  USB.println(F(" degrees Celsius"));
  USB.print(F("SAC: "));
  USB.printFloat(mySensor.sensorSAC.sac, 4);
  USB.println(F(" m-1"));
  USB.print(F("COD: "));
  USB.printFloat(mySensor.sensorSAC.cod, 4);
  USB.println(F(" mg/L"));
  USB.print(F("BOD: "));
  USB.printFloat(mySensor.sensorSAC.bod, 4);
  USB.println(F(" mg/L"));
  USB.print(F("COT: "));
  USB.printFloat(mySensor.sensorSAC.cot, 4);
  USB.println(F(" mg/L carbon"));
  if (mySensor.socket == XTR_SOCKET_E)
  {
    USB.print(F("UV Compensated absorbance: "));
    USB.printFloat(mySensor.sensorSAC.uvComp, 4);
    USB.println(F(" []"));
    USB.print(F("GR Compensated absorbance: "));
    USB.printFloat(mySensor.sensorSAC.grComp, 4);
    USB.println(F(" []"));
    USB.print(F("Turbidity equivalent: "));
    USB.printFloat(mySensor.sensorSAC.turb, 4);
    USB.println(F(" FAU"));
    USB.print(F("UV transmittance: "));
    USB.printFloat(mySensor.sensorSAC.uvTran, 4);
    USB.println(F(" []"));
    USB.print(F("GR transmittance: "));
    USB.printFloat(mySensor.sensorSAC.grTran, 4);
    USB.println(F(" []"));
    USB.println(F("---------------------------"));
  }
  delay(5000);
}

Output

J#
SAC example 
---------------------------
SAC
Temperature: 21.2000 degrees Celsius
SAC: 250.0000 m-1
COD: 350.0000 mg/L
BOD: 250.0000 mg/L
COT: 250.0000 mg/L carbon