WiFi PRO 04: Static IP
This example shows how to set up static settings for the WiFi module. In this example it is shown how to set the static IP address, the DNS server address, the gateway address and the netmask address
Required Materials
1 x Waspmote 1 x Battery 1 x WiFi PRO Module
Notes
- The battery has to be connected. - This example can be executed in Waspmote v15
Code
/*
* ------ WIFI Example --------
*
* Explanation: This example shows how to set up static settings for
* the WiFi module. In this example it is shown how to set the static
* IP address, the DNS server address, the gateway address and the
* netmask address
*
* Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L.
* http://www.libelium.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*
* Version: 3.0
* Design: David Gascon
* Implementation: Yuri Carmona
*/
// Put your libraries here (#include ...)
#include <WaspWIFI_PRO.h>
// choose socket (SELECT USER'S SOCKET)
///////////////////////////////////////
uint8_t socket = SOCKET0;
///////////////////////////////////////
// Define static IP Address
///////////////////////////////////////
char STATIC_IP[] = "10.10.10.12";
char DNS_ADDRESS[] = "8.8.8.8";
char GATEWAY[] = "10.10.10.1";
char NETMASK[] = "255.255.128.0";
///////////////////////////////////////
uint8_t error;
uint8_t status;
unsigned long previous;
void setup()
{
USB.println(F("Start program"));
USB.println(F("***************************************"));
USB.println(F("Once the module is set with one or more"));
USB.println(F("AP settings, it attempts to join the AP"));
USB.println(F("automatically once it is powered on"));
USB.println(F("Refer to example 'WIFI_PRO_01' to configure"));
USB.println(F("the WiFi module with proper settings"));
USB.println(F("***************************************"));
//////////////////////////////////////////////////
// 1. Switch ON
//////////////////////////////////////////////////
error = WIFI_PRO.ON(socket);
if (error == 0)
{
USB.println(F("1. WiFi switched ON"));
}
else
{
USB.println(F("1. WiFi did not initialize correctly"));
}
//////////////////////////////////////////////////
// 2. Set static IP address
//////////////////////////////////////////////////
// set IP address
error = WIFI_PRO.setIP(STATIC_IP);
// Check answer
if (error == 0)
{
USB.println(F("2. Static IP set OK"));
}
else
{
USB.println(F("2. Error calling 'setIP' function"));
WIFI_PRO.printErrorCode();
}
//////////////////////////////////////////////////
// 3. Set DNS server
//////////////////////////////////////////////////
// set DNS address
error = WIFI_PRO.setDNS(DNS_ADDRESS);
// Check answer
if (error == 0)
{
USB.println(F("3. DNS server set OK"));
}
else
{
USB.println(F("3. Error calling 'setDNS' function"));
WIFI_PRO.printErrorCode();
}
//////////////////////////////////////////////////
// 4. Set DNS server
//////////////////////////////////////////////////
// set GW address
error = WIFI_PRO.setGateway(GATEWAY);
// Check answer
if (error == 0)
{
USB.println(F("4. Gateway set OK"));
}
else
{
USB.println(F("4. Error calling 'setGateway' function"));
WIFI_PRO.printErrorCode();
}
//////////////////////////////////////////////////
// 5. Set Subnet mask address
//////////////////////////////////////////////////
// set Netmask
error = WIFI_PRO.setNetmask(NETMASK);
// Check answer
if (error == 0)
{
USB.println(F("5. Netmask set OK"));
}
else
{
USB.println(F("5. Error calling 'setNetmask' function"));
WIFI_PRO.printErrorCode();
}
//////////////////////////////////////////////////
// 6. Software Reset
// Parameters take effect following either a
// hardware or software reset
//////////////////////////////////////////////////
error = WIFI_PRO.softReset();
if (error == 0)
{
USB.println(F("6. WiFi softReset OK"));
}
else
{
USB.println(F("6. Error calling 'softReset' function"));
}
USB.println(F("Setup DONE\n\n"));
}
void loop()
{
// get actual time
previous = millis();
//////////////////////////////////////////////////
// 1. Switch ON
//////////////////////////////////////////////////
error = WIFI_PRO.ON(socket);
if (error == 0)
{
USB.println(F("1. WiFi switched ON"));
}
else
{
USB.println(F("1. WiFi did not initialize correctly"));
}
//////////////////////////////////////////////////
// 2. Check if connected
//////////////////////////////////////////////////
// check connectivity
status = WIFI_PRO.isConnected();
// Check if module is connected
if (status == true)
{
USB.print(F("2. WiFi is connected OK"));
USB.print(F(" Time(ms):"));
USB.println(millis()-previous);
///////////////////////////////////////////////
// 2.1. current ESSID
///////////////////////////////////////////////
error = WIFI_PRO.getESSID();
// check response
if (error == 0)
{
USB.print(F("2.1. Current ESSID: "));
USB.println( WIFI_PRO._essid );
}
else
{
USB.println(F("2.1. Error calling 'getESSID' function"));
WIFI_PRO.printErrorCode();
}
///////////////////////////////////////////////
// 2.2. get active IP address
///////////////////////////////////////////////
error = WIFI_PRO.getIP();
if (error == 0)
{
USB.print(F("2.2. IP address:"));
USB.println(WIFI_PRO._ip);
}
else
{
USB.println(F("2.2. Error calling 'getIP' function"));
}
///////////////////////////////////////////////
// 2.3. ping
///////////////////////////////////////////////
error = WIFI_PRO.ping("www.google.com");
// check response
if (error == 0)
{
USB.print(F("2.3. Round Trip Time (ms) = "));
USB.println( WIFI_PRO._rtt, DEC );
}
else
{
USB.println(F("2.3. Error calling 'ping' function"));
WIFI_PRO.printErrorCode();
}
}
else
{
USB.print(F("2. WiFi is connected ERROR"));
USB.print(F(" Time(ms):"));
USB.println(millis()-previous);
}
//////////////////////////////////////////////////
// 3. Switch OFF
//////////////////////////////////////////////////
WIFI_PRO.OFF(socket);
USB.println(F("WiFi switched OFF\n\n"));
delay(10000);
}Output
H#
Start program
***************************************
Once the module is set with one or more
AP settings, it attempts to join the AP
automatically once it is powered on
Refer to example 'WIFI_PRO_01' to configure
the WiFi module with proper settings
***************************************
1. WiFi switched ON
2. Static IP set OK
3. DNS server set OK
4. Gateway set OK
5. Netmask set OK
6. WiFi softReset OK
Setup DONE
1. WiFi switched ON
2. WiFi is connected OK Time(ms):3356
2.1. Current ESSID: libelium_AP2
2.2. IP address:10.10.10.12
2.3. Round Trip Time (ms) = 17
WiFi switched OFFLast updated