Important: read me before using

The following list shows just some of the actions that produce the most common failures and warranty-voiding. Complete documentation about usage can be found at:

http://www.libelium.com/development/meshlium/technical_service/

Failure to comply with the recommendations of use will entail the guarantee cancellation.

• Do not interrupt the power supply before shutting down Meshlium properly through the "Shutdown" or "Restart" buttons in the Manager System.

• Do not open the Meshlium enclosure in any case. This will automatically make the warranty void.

• Do not submerge Meshlium in liquids.

• Do not place Meshlium on places or equipment where the device could be exposed to shocks and/or vibrations.

• Do not expose Meshlium to temperatures below -20ºC or above 50ºC.

• Meshlium's microprocessor must not overpass 90ºC. The user must ensure that this temperature is never overpassed. Especially when using WiFi Scan.

• Do not power Meshlium with other power sources than the original provided by Libelium.

For more information: https://development.libelium.com/meshlium/