Waspmote Technical Guide
Development website
  • Initial page
  • Introduction
  • Waspmote kit
  • Waspmote Plug & Sense! - Encapsulated line
  • Hardware
  • Architecture and system
  • Interruptions
  • Energy system
  • Sensors
  • 802.15.4/ZigBee/RF modules
  • LoRaWAN modules
  • LoRa module
  • Sigfox modules
  • WiFi PRO module
  • WiFi PRO V3 module
  • Bluetooth Pro module
  • Bluetooth Low Energy module
  • 4G module
  • NB-IoT / Cat-M module
  • RFID/NFC module
  • Industrial Protocols
  • Expansion Radio Board
  • Over the Air Programming (OTA)
  • Encryption libraries
  • GPS
  • SD memory card
  • Energy Consumption
  • Power supplies
  • Working environment
  • Interacting with Waspmote
  • Meshlium - The IoT Gateway
  • Certifications
  • Maintenance
  • Disposal and recycling
  • Documentation changelog
Powered by GitBook
On this page
  • Meshlium storage options
  • Meshlium connection options
  • Meshlium Visualizer
  • Cloud Connectors
  • The Bridge

Was this helpful?

Meshlium - The IoT Gateway

PreviousInteracting with WaspmoteNextCertifications

Last updated 4 years ago

Was this helpful?

The sensor data gathered by the Waspmote Plug & Sense! nodes is sent to the Cloud by Meshlium, the IoT gateway router specially designed to connect Waspmote sensor networks to the Internet via Ethernet and 4G/3G/2G interfaces.

Meshlium can work as:

  • an RF (XBee) to Ethernet router for Waspmote nodes

  • an RF (XBee) to 4G/3G/GPRS/GSM router for Waspmote nodes

  • a WiFi Access Point

  • a WiFi to 4G/3G/GPRS/GSM router

  • a GPS – 4G/3G/GPRS/GSM real-time tracker

  • a smartphone scanner (detects iPhone and Android devices)

Meshlium storage options

  • Local data base

  • External data base

Meshlium connection options

  • XBee / 4G / 3G / 2G / WiFi → Ethernet

  • XBee / 4G / 3G / 2G / WiFi → 4G / 3G / 2G

All the networking options can be controlled from the Manager System, a web interface which comes with Meshlium. It allows to control all the interfaces and system options in a secure, easy and quick way.

Meshlium Visualizer

Meshlium Visualizer is a plugin which plots graphs and maps with the data stored in the database. It can also export data in common formats. Meshlium Visualizer is a special software feature only available in the Meshlium units included in the IoT Vertical Kits (Smart Cities IoT Vertical Kit, Smart Water IoT Vertical Kit, etc).

Cloud Connectors

Meshlium allows developers to connect easily with third party cloud servers such as Amazon, IBM, Microsoft, Alibaba, Telefónica, ESRI, ThingWorks, etc. Just select the desired plugin in the Manager System and add the account info to synchronize the internal data base of Meshlium with the desired platform.

The Bridge

All information about Meshlium can be found in the .

All the Meshlium documentation is located in the in the Libelium website.

is a service on the cloud created by Libelium. It sends information from any IoT device to the main worldwide cloud platforms simultaneously and without having to implement each specific cloud protocol or authentication process.

For more info about Meshlium go to:

Meshlium Technical Guide
Development section
The Bridge
http://www.libelium.com/products/meshlium/
Figure: Meshlium device
Figure: Meshlium storage options
Figure: Meshlium connection options
Figure: Meshlium Manager System
Figure: Meshlium visualizer
Figure: The Bridge