Waspmote Plug & Sense!

Smart Water Xtreme

Smart Water Xtreme was created as an evolution of Smart Water. This model integrates high-end sensors, calibrated in factory, with enhanced accuracy and performance. Their reduced recalibration requirements and robust design enlarge maintenance periods, making it more affordable to deploy remote Smart Water applications. This line includes a great combination of the most significant water parameters like dissolved oxygen, pH, oxidation-reduction potential, conductivity, salinity, turbidity, suspended solids, sludge blanket or temperature.
Refer to Libelium website for more information.
Figure: Smart Water Xtreme Waspmote Plug & Sense! model
Sensor sockets are configured as shown in the table below:
Sensor
Sensor probes allowed for each sensor socket (Parameter)
Sensor probes allowed for each sensor socket (Reference)
A, B, C, D and E
Optical dissolved oxygen and temperature OPTOD
9488-P
A, B, C, D and E
Titanium optical dissolved oxygen and temperature OPTOD
9489-P
A, B, C, D and E
pH, ORP and temperature PHEHT
9485-P
A, B, C, D and E
Conductivity, salinity and temperature C4E
9486-P
A, B, C, D and E
Inductive conductivity, salinity and temperature CTZN
9487-P
A, B, C, D and E
Turbidity and temperature NTU
9353-P
A, B, C, D and E
Suspended solids, turbidity, sludge blanket and temperature MES5
9490-P
A, B, C, D and E
COD, BOD, TOC, SAC254 and temp StacSense, 2 mm path
9500-P
A, B, C, D and E
2COD, BOD, TOC, SAC254 and temp StacSense, 50 mm path
9501-P
A, B, C and D
Radar level VEGAPULS C21
9514-P
A and D
Temperature, air humidity and pressure
9370-P
A and D
Luxes
9325-P
A and D
Ultrasound
9246-P
F
Total coliform bacteria, TLF, turbidity and temperature Proteus
9513-P
F
Manta+ 35A sensor probe
9502-P
F
Manta+ 35B sensor probe
9503-P
F
Chlorophyll sensor for Manta probe
72470
F
BGA sensor for Manta probe
72471
F
Organic matter CDOM/FDOM sensor for Manta probe
72472
For more technical information about each sensor probe, go to the Sensors section on this guide:
Copy link