This section shows main parts of Waspmote Plug & Sense! and a brief description of each one. In later sections all parts will be described deeply.
Cover screws: stainless steel
Ingress protection: IP65
Impact resistance: IK08
Rated insulation voltage AC: 690 V
Rated insulation voltage DC: 1000 V
Weatherproof: true - nach UL 746 C
Ambient temperature (min.): -30 °C*
Ambient temperature (max.): 70 °C*
Approximated weight: 800 g
In the pictures included below it is shown a general view of Waspmote Plug & Sense! main parts. Some elements are dedicated to node control, others are designated to sensor connection and other parts are just identification elements. All of them will be described along this guide.
Next picture shows Waspmote Plug & Sense! and all of its elements. Some of them are optional accessories that may not be included.
Each Waspmote model is identified by stickers. Next figure shows front sticker.
There are many configurations of Waspmote Plug & Sense! line, all of them identified by one unique sticker. Next image shows all possibilities.
Moreover, Waspmote Plug & Sense! includes a back sticker where it is shown identification numbers, radio MAC addresses, etc. It is highly recommended to annotate this information and save it for future maintenance. Next figure shows it in detail.
Sensor probes are identified too by a sticker showing the measured parameter and the sensor manufacturer reference.