SmartCityPlatform
Last updated
Was this helpful?
Last updated
Was this helpful?
The SmartCityPlatform connects all the core elements of a successfully managed city. It allows the SmartMayor to manage urban development, socio-economic development and technological development of the city, measuring and reporting progress in real time.
By using this cloud connector, you connect to the Sense module, which is a part of SmartCityPlatform. It allows an overview of the city's pulse by gathering, measuring & monitoring happenings in the city.
To use the SmartCityPlatform cloud connector, you need to register your Meshlium in the authentication server. The server provides you with credentials, which you will enter in the form below. When you finish configuring, click the "Save" button to save the configuration.
Hostname: the IP or hostname of the sensor broker.
Port: the port where the sensor broker is listening for connections.
Account server: the IP or hostname of the account server.
Client ID: client identification provided by the authentication server.
Client secret: client secret provided by the authentication server.
Device ID: device identification provided by the authentication server.
Device secret: device secret provided by the authentication server.
Device group: the name you set for your device group.
Interval: time duration in seconds between synchronizing data batches.
With the configuration saved, you can start using the cloud connector. To start the synchronization, press the green "Start" button on the right.
You get a "loading" status inside the synchronization control section, indicating the synchronization is starting.
When the cloud connector starts, a green dot on the left appears, indicating the synchronization is running. To stop the synchronization, simply click on the red "Stop" button on the right.
