ThingPlus
Last updated
Last updated
This Cloud Connector is no longer available since November 2020
Thing+ allows customers to build their own IoT services with high speed, reliability, scalability, and cost competitiveness, connected by a SaaS or PaaS IoT platform. When Thing+ Embedded devices connect to the Thing+ Cloud (public or private), customers can visualize various data graphs and charts from sensors directly on the Thing+ Portal. Device registration is easy as the Thing+ Portal provides dashboard widgets, a trigger-condition-action-based rule engine for alert notifications or to control actuators, and results in the form of an event timeline.
Get the "Gateway ID" to register:
Open the Meshlium Manager System.
Click Cloud Connector.
Open the ThingPlus plugin.
You can see ThingPlus configuration and "Gateway ID".
Copy the "Gateway ID".
Get the API Key:
Go to your ThingPlus service (if you have no registered service, register your service) https://yourservice.thingplus.net.
Go to Gateway Management page (via upper right menu).
Click the + button in the upper right corner.
Click "Request for Gateway certificates or API Key" button.
Fill form.
Gateway ID.
Select "API Key" (Authentication Type).
Click "Get API Key".
Copy the "API Key".
Set "API Key" in the Meshlium Manager System.
Go to ThingPlus configuration again.
Paste the "API Key".
Click the "Save" button (ThingPlus gateway app will restart).
If the status is "STOPPED", then click on the "Start" button after saving API Key.
Go to your ThingPlus service.
Go to Gateway Management page (via upper right menu).
Click the + button in the upper right corner.
Fill the form:
Select Gateway Model as "Libelium Meshlium".
Input Gateway ID (the same MAC address when registering gateway).
Select Device Model as "Waspmote Basic".
Input Device Address (Waspmote address is the id_wasp field).
Input Device Name.
Select Sensors to register (all sensors are selected as default).
Select Site Name (default).
Click "Register a Gateway, Devices and Sensors" button:
ThingPlus gateway app will restart and send the sensor data in a few minutes.
You can see the sensor data at Dashboard or Sensor page.
